Loading plugin...
Makes your AI agent think like the laziest senior dev in the room. The best code is the code you never wrote.
You know him. Long ponytail. Oval glasses. Has been at the company longer than the version control. You show him fifty lines; he looks at them, says nothing, and replaces them with one.
Ponytail puts him inside your AI agent.
You ask for a date picker. Your agent installs flatpickr, writes a wrapper component, adds a stylesheet, and starts a discussion about timezones.
With ponytail:
<!-- ponytail: browser has one -->
<input type="date">
More survivors in examples/.
The honest measurement is a real agent doing real work: a headless Claude Code session editing tiangolo's full-stack-fastapi-template (a real FastAPI + React repo), scored on the git diff it leaves behind. Twelve feature tickets, the same agent with and without the skill, n=4, Haiku 4.5.
| vs no-skill baseline | LOC | tokens | cost | time | safe |
|---|---|---|---|---|---|
| ponytail | -54% | -22% | -20% | -27% | 100% |
| caveman (terse-prose control) | -20% | +7% | +3% | +2% | 100% |
| "YAGNI + one-liners" prompt | -33% | -14% | -21% | -30% | 95% |
ponytail is the only arm that cuts every metric, and the only one that stays fully safe while doing it. The cut is biggest where there is a real over-build trap (date picker 404 to 23 lines, color picker 287 to 23, because it reaches for a native <input> instead of a component) and near zero on code that is already minimal. Full method, per-task tables, and limitations: benchmarks/results/2026-06-18-agentic.md.
Five everyday tasks, three models, three arms (no skill, caveman, ponytail), ten runs, median reported. One prompt, one completion, counting lines of the answer:
This showed 80-94% less code. #126 fairly pointed out that the bare-model baseline pads its answer with prose and options, so that gap is partly a conversational-baseline artifact. The agentic numbers above are the corrected, defensible version. Reproduce the single-shot run with npx promptfoo eval -c benchmarks/promptfooconfig.yaml.
The rule was never "fewest tokens." It is: write only what the task needs, and never cut validation, error handling, security, or accessibility. The code ends up small because it is necessary, not golfed. Lower cost and latency are a side effect on the models that follow the ladder; a terse reasoning model that spends thinking tokens deliberating the rungs can go the other way (on GPT-5.5 it does).
Before writing code, the agent stops at the first rung that holds:
1. Does this need to exist? → no: skip it (YAGNI)
2. Already in this codebase? → reuse it, don't rewrite
3. Stdlib does it? → use it
4. Native platform feature? → use it
5. Installed dependency? → use it
6. One line? → one line
7. Only then: the minimum that works
The ladder runs after it understands the problem, not instead of it: it reads the code the change touches and traces the real flow before picking a rung. Lazy about the solution, never about reading.
Lazy, not negligent: trust-boundary validation, data-loss handling, security, and accessibility are never on the chopping block.
The most effort ponytail will ever ask of you:
The Claude Code and Codex plugins run two tiny Node.js lifecycle hooks, so node needs to be on your PATH (note for Nix/nvm users: it must be on the non-interactive shell's PATH). If it isn't, the skills still work, the always-on activation just stays quiet instead of erroring on every prompt.
/plugin marketplace add DietrichGebert/ponytail
/plugin install ponytail@ponytail
(You have to send two separate prompts for the install to work)
Same steps in the Claude Code Desktop app's Code tab: type the two /plugin commands above into the prompt box, or click the + button next to it, choose Plugins → Add plugin to browse your configured marketplaces, and manage marketplaces from Customize in the sidebar.
codex plugin marketplace add DietrichGebert/ponytail
codex plugin add ponytail@ponytail
Run codex and open /hooks, review and trust its two lifecycle hooks, and start a new thread.
This same install also covers the Codex desktop app: restart the app after installing and it picks up the plugin.
copilot plugin marketplace add DietrichGebert/ponytail
copilot plugin install ponytail@ponytail
In an interactive Copilot CLI session, use the slash equivalents:
/plugin marketplace add DietrichGebert/ponytail
/plugin install ponytail@ponytail
Copilot CLI namespaces plugin commands by plugin name. For example:
/ponytail:ponytail ultra
/ponytail:ponytail-review
pi install git:github.com/DietrichGebert/ponytail
Add to opencode.json:
{ "plugin": ["@dietrichgebert/ponytail"] }
Run from a checkout instead (the plugin reuses hooks/ and skills/):
{ "plugin": ["./.opencode/plugins/ponytail.mjs"] }
Injects the ruleset every turn at the active level; adds the /ponytail commands (see Commands). OpenCode also auto-loads this repo's AGENTS.md, so the rules hold even without the plugin. The plugin adds the lite/full/ultra/off levels.
The ./ path resolves against your project's opencode.json; to share one checkout across projects, point it at the absolute path of the .mjs instead (it finds its hooks/ and skills/ relative to its own file).
gemini extensions install https://github.com/DietrichGebert/ponytail
Loads the ruleset as always-on context every session and registers the /ponytail commands; the skills/ ship too, activated when a task needs them.
The Gemini adapter intentionally does not ship a root hooks/hooks.json: Gemini auto-loads that path, while Ponytail's lifecycle hooks use Claude/Codex event names.
Qoder auto-loads AGENTS.md from the repo root as always-on context, so running ponytail from a checkout works with zero setup. For per-project rules, copy .qoder/rules/ponytail.md into your project's .qoder/rules/. The six ponytail skills (/ponytail, /ponytail-review, /ponytail-audit, /ponytail-debt, /ponytail-gain, /ponytail-help) are available via Qoder's Skill system; the plugin manifest at .qoder-plugin/plugin.json points at the skills/ directory.
For full plugin-tier support (automatic mode activation + ruleset injection on every prompt), add the hooks from hooks/qoder-hooks.json to your .qoder/settings.json. Replace PONYTAIL_DIR with the path to your ponytail checkout. Qoder's UserPromptSubmit hook activates the default mode on first prompt and injects the ruleset every turn; PreToolUse with task|Task matcher injects the ruleset into subagents. Level switches (/ponytail lite|full|ultra|off) work automatically.
Google is renaming Gemini CLI to Antigravity CLI (the agy binary); the same extension installs there:
agy plugin install https://github.com/DietrichGebert/ponytail
It reuses this repo's gemini-extension.json. One difference: Antigravity converts the /ponytail commands into skills, so you type them into the chat (e.g. /ponytail-review as a message) instead of picking them from a slash menu. Until the migration completes (around June 18, 2026), gemini extensions install still works too. To run it as an always-on rule instead, drop the ruleset into .agents/rules/.
hermes plugins install DietrichGebert/ponytail --enable
Restart Hermes after installing. The plugin injects the active Ponytail mode before each LLM turn, registers the bundled skills as ponytail:<skill>, and adds /ponytail, /ponytail-review, /ponytail-audit, /ponytail-debt, /ponytail-gain, and /ponytail-help. In shared gateways, restrict /ponytail to trusted users with Hermes slash-command access controls; runtime mode is process-local.
Reads AGENTS.md from the project root, zero setup. Copy AGENTS.md to your project, or run codewhale from a checkout of this repo. That's it.
Stage the collection in your library first, then add the skills you want:
swival skills add --global https://github.com/DietrichGebert/ponytail # stage into ~/.config/swival/library
swival skills add ponytail # install the collection into this project
swival skills add --global ponytail # or activate it in every project
Swival also reads AGENTS.md from the project root and ~/.config/swival/AGENTS.md globally, the instruction-only fallback.
On the command line, use a $ prefix to explicitly activate a skill. For example: $ponytail-review.
devin plugins install DietrichGebert/ponytail
Installs ponytail as a Devin plugin; skills are available as /ponytail:ponytail, /ponytail:ponytail-review, and so on.
clawhub install ponytail
Installs ponytail as an OpenClaw skill from ClawHub; the review, audit, debt, gain, and help skills install the same way (clawhub install ponytail-review, and so on). OpenClaw applies it on coding tasks and also exposes it as a /ponytail command. Without ClawHub, copy .openclaw/skills/ponytail into ~/.openclaw/skills/.
That was it. He'd be proud. He won't say it.
Active every session, with a handful of commands (see Commands). /ponytail ultra exists for when the codebase has wronged you personally. Startup and mode-change text shows the current mode.
Set the level for every new session with the PONYTAIL_DEFAULT_MODE env var (lite/full/ultra/off), or a defaultMode field in ~/.config/ponytail/config.json (%APPDATA%\ponytail\config.json on Windows). The default is full.
While active, the ruleset is also injected into every subagent spawned via the Agent tool. To scope that to specific agent types (say, keep it off read-only search agents), set the PONYTAIL_SUBAGENT_MATCHER env var to a regex tested against the subagent's agent_type. It is unanchored and case-insensitive: explore|general matches either, ^general$ is exact, and plugin agent types look like plugin:name. Unset means inject into every subagent (the default); an invalid regex, or a subagent whose type the platform doesn't report, also falls back to injecting.
Cursor, Windsurf, Cline, GitHub Copilot Chat (the VS Code, JetBrains, and Visual Studio editor extension, not the standalone Copilot CLI covered under Install), Aider, Kiro, Zed, CodeWhale, Swival, Qoder: copy the matching rules file from this repo (.cursor/rules/, .windsurf/rules/, .clinerules/, .github/copilot-instructions.md, AGENTS.md, .kiro/steering/, .qoder/rules/).
Kiro: copy .kiro/steering/ponytail.md to ~/.kiro/steering/ (global) or .kiro/steering/ in your project.
GitHub Copilot CLI fallback (instruction-only mode): it reads AGENTS.md and .github/copilot-instructions.md in a project, or copy the rules into ~/.copilot/copilot-instructions.md to run ponytail in every project. This path keeps always-on guidance, but does not add plugin mode switches or hooks.
VS Code with the Codex extension reads AGENTS.md, which this repo ships, so it works from the repo root with no setup (~/.codex/AGENTS.md makes Codex global).
JetBrains Junie can read AGENTS.md once you point it there in Settings → Tools → Junie → Project Settings → Guidelines Path (it is not automatic yet). This repo ships AGENTS.md; .junie/guidelines.md is Junie's legacy path.
Amp (Sourcegraph) reads AGENTS.md from the working directory and parent directories up to $HOME, which this repo ships, so it works with no setup (~/.config/amp/AGENTS.md works globally).
Jules (Google) reads AGENTS.md from the repository root, which this repo ships, so it picks up the ruleset with no setup.
Which files map to which agent: Agent portability.
| Host | Command |
|---|---|
| Claude Code | /plugin remove ponytail |
| Codex | codex plugin remove ponytail |
| Devin CLI | devin plugins remove ponytail |
| Pi agent | pi uninstall ponytail |
| Cursor / Windsurf / Cline / Qoder / etc. | Delete the copied rule file |
These remove the plugin's own files. They leave behind a small amount of state ponytail writes outside the plugin folder: the mode flag, ~/.config/ponytail/config.json, and (if you accepted the setup nudge) a statusLine entry in ~/.claude/settings.json. Run node scripts/uninstall.js to clean those up too. Run it before the host remove command above — the script is itself a plugin file, so removing the plugin first deletes it (or run it from a separate clone of this repo). It only removes the statusLine entry if it points at ponytail's own script, so a statusline you set up yourself is left untouched.
| Command | What it does |
|---|---|
/ponytail [lite | full | ultra | off] | Set the intensity, or turn it off. No argument reports the current level. |
/ponytail-review | Review the current diff for over-engineering, hands back a delete-list. |
/ponytail-audit | Audit the whole repo for over-engineering, not just the diff. |
/ponytail-debt | Harvest the ponytail: shortcuts you've deferred into a ledger, so "later" doesn't become "never". |
/ponytail-gain | Show the measured impact scoreboard (less code, less cost, more speed) from the benchmark. |
/ponytail-help | Quick reference for the commands above. |
Commands need a skill-capable host (Claude Code, Codex, Devin CLI, OpenCode, Gemini, pi, Swival, Hermes Agent, Qoder). In Codex they're skills, invoke with @ (@ponytail-review). The instruction-only adapters (Cursor, Windsurf, Cline, Copilot, Kiro, Antigravity) load the always-on ruleset without the commands.
When changing the compact rule text, keep the agent copies aligned:
node scripts/check-rule-copies.js
npm test
The OpenClaw skill package (.openclaw/skills/) is generated from skills/; rerun node scripts/build-openclaw-skills.js after changing a skill, the test suite fails if it is stale. To publish the skills to ClawHub, run clawhub login once, then node scripts/publish-openclaw-skills.js (it publishes all six at the package.json version; pass --dry-run to preview).
The correctness benchmark spawns Python for email and CSV checks; python3 is tried before python. CSV checks need pandas installed locally.
Can I use it with caveman? Yes, and you should. Caveman shrinks what the agent says; ponytail shrinks what it builds. Different halves, no overlap: caveman leaves code byte-for-byte exact, ponytail stays out of the prose. Terse talk about minimal code.
Does it need a config file?
No. An optional ~/.config/ponytail/config.json or PONYTAIL_DEFAULT_MODE env var can set the default level, but nothing is required.
What if I really need the 120-line cache class? You don't. Insist anyway and he'll build it. Slowly. Correctly. While looking at you.
Does it scale? The code you never wrote scales infinitely. Zero bugs, zero CVEs, 100% uptime since forever.
Why "ponytail"? You know exactly why.
MIT. The shortest license that works.
__init__.py
.agents/
plugins/
marketplace.json
rules/
ponytail.md
.claude-plugin/
marketplace.json
plugin.json
.clinerules/
ponytail.md
.codex-plugin/
plugin.json
.cursor/
rules/
ponytail.mdc
.devin-plugin/
plugin.json
.env.example
.github/
copilot-instructions.md
FUNDING.yml
plugin/
marketplace.json
plugin.json
workflows/
publish.yml
test.yml
.gitignore
.kiro/
steering/
ponytail.md
.openclaw/
skills/
ponytail/
ponytail-audit/
SKILL.md
ponytail-debt/
SKILL.md
ponytail-gain/
SKILL.md
ponytail-help/
SKILL.md
ponytail-review/
SKILL.md
SKILL.md
.opencode/
command/
ponytail-audit.md
ponytail-debt.md
ponytail-gain.md
ponytail-help.md
ponytail-review.md
ponytail.md
plugins/
ponytail-frontmatter.cjs
ponytail.mjs
.qoder/
.qoder-plugin/
plugin.json
rules/
ponytail.md
.windsurf/
rules/
ponytail.md
after-install.md
AGENTS.md
assets/
benchmark-3model.svg
benchmark-agentic.svg
logo-dark.png
logo-dark.svg
logo-greenpt-dark.svg
logo-greenpt.svg
logo.png
social-preview.png
waitlist-banner-es.png
waitlist-banner-ko.png
waitlist-banner.png
benchmarks/
agentic/
complete.py
judge.py
README.md
run.py
tasks.py
arms/
baseline.js
caveman-SKILL.md
caveman.js
ponytail.js
behavior.js
behavior.yaml
benchmark-local.py
claude-email.js
correctness.js
correctness.test.js
generate-examples.mjs
loc.js
loc.test.js
model-email.js
promptfooconfig.gemini.yaml
promptfooconfig.gpt-newest.yaml
promptfooconfig.gpt.yaml
promptfooconfig.yaml
prompts.json
README.md
results/
2026-06-12-caveman-vs-ponytail.md
2026-06-12-v4-hardening-vs-caveman.md
2026-06-15-llama3.2-local.md
2026-06-16-correctness-gate-fix.md
2026-06-16-robustness-audit.md
2026-06-17-agentic-safety.md
2026-06-17-cost-verification.md
2026-06-18-agentic.md
2026-06-22-issue-245-217-comprehension.md
robustness-audit.js
commands/
ponytail-audit.toml
ponytail-debt.toml
ponytail-gain.toml
ponytail-help.toml
ponytail-review.toml
ponytail.toml
docs/
agent-portability.md
platform-native.md
examples/
csv-sum.md
debounce.md
deep-clone.md
email-validation.md
group-by.md
infinite-scroll.md
modal-dialog.md
number-formatting.md
rate-limit.md
react-countdown.md
README.md
url-params.md
gemini-extension.json
hooks/
claude-codex-hooks.json
copilot-hooks.json
ponytail-activate.js
ponytail-config.js
ponytail-instructions.js
ponytail-mode-tracker.js
ponytail-runtime.js
ponytail-statusline.ps1
ponytail-statusline.sh
ponytail-subagent.js
qoder-hooks.json
LICENSE
opencode.json
package.json
pi-extension/
index.js
package.json
test/
extension.test.js
helpers.test.js
plugin.yaml
ponytail-mcp/
index.js
instructions.js
package.json
README.md
test/
instructions.test.js
README.es.md
README.ko.md
README.md
scripts/
build-openclaw-skills.js
check-rule-copies.js
check-versions.js
publish-openclaw-skills.js
uninstall.js
skills/
ponytail/
ponytail-audit/
SKILL.md
ponytail-debt/
SKILL.md
ponytail-gain/
SKILL.md
ponytail-help/
SKILL.md
ponytail-review/
SKILL.md
SKILL.md
tests/
behavior.test.js
commands.test.js
copilot-plugin.test.js
correctness.test.js
gemini-extension.test.js
hermes-plugin.test.js
hooks-windows.test.js
hooks.test.js
openclaw-skills.test.js
opencode-plugin.test.js
package-scripts.test.js
package.test.js
qoder-plugin.test.js
uninstall.test.js© 2026 Flowy · Free and open source
Built for Claude Code · Not affiliated with Anthropic