/workbench-integration
Integrates an ESP32 project with the Universal ESP32 Workbench. Adds firmware modules (UDP logging, WiFi provisioning, OTA, BLE command handling, strategic log messages), updates build config, then writes the Workbench operations, Testing, and Appendix chapters into the
$ npx -y skills add SensorsIot/Embedded-AI-Harness --skill workbench-integration --agent claude-codeHow it fires
How this skill gets triggered: by you, by Claude, or both.
- Fires itselfAuto-invocation. Claude auto-loads it when your prompt matches the work.Auto-invocation is when the right skill fires by itself at the right moment, driven by a FLOW.md router and a hook, instead of you invoking it by name. It is the difference between a skill being installed and a skill actually getting used.Read the full definition →
- You can call itInvoke it directly when you want it.
- Slash command
/workbench-integration
Context preview
The summary Claude sees to decide when to auto-load this skill.
Integrates an ESP32 project with the Universal ESP32 Workbench. Adds firmware modules (UDP logging, WiFi provisioning, OTA, BLE command handling, strategic log messages), updates build config, then writes the Workbench operations, Testing, and Appendix chapters into the
Other skills on embedded-ai-harness.
- /build
Phase 3 of AI Closed-Loop Programming — the Build phase, and the driver of the whole loop: locate the project on the chain, name the next act, design and declare tests, dispatch code/flash/verify, correct until the tests run clean. Owns the test plan, test design, audit,
Open skill - /commission
Phase 2 of AI Closed-Loop Programming — Commissioning: prove the project's OWN never-seen-working parts (its board, its wiring, its peers/simulators), so that a failing test means the code and not the setup. The workbench itself is never commissioned by a project — its quality
Open skill - /define
Phase 0 of AI Closed-Loop Programming — Definition: engineers the WHAT the loop converges on. Writes and evolves the FSD — atomic, falsifiable, provenance-tagged requirements each carrying its verification contract — plus architecture, data model, interface definitions, state
Open skill - /esp-idf-handling
Complete ESP-IDF lifecycle: project setup, build, flash, monitor, and OTA. Automatically detects whether a workbench is available or the device is connected locally via USB. Covers sdkconfig, partition tables, esptool, RFC2217 remote flashing, GPIO download mode, OTA updates,
Open skill - /esp-pio-handling
PlatformIO lifecycle for ESP32 firmware: platformio.ini, environment selection, build, upload and serial monitor, on local USB or through the workbench. Covers what differs from ESP-IDF — the .pio/build layout, the boot_app0 image an Arduino-framework build needs, and RFC2217
Open skill - /grill-me
Interview the user relentlessly about a plan or design until reaching shared understanding, resolving each branch of the decision tree. Use when user wants to stress-test a plan, get grilled on their design, or mentions "grill me".
Open skill